Non Clog Submersible Pumps India Manufacturers Multi-Stage Pumps Indian Pump Supplyer Delhi India INDIA Indian Water Flow Range cast iron bowls stainless steel impeller shaftshigh quality pattern making Trash pumps hazardous locations mechanical seals Vertical Propellers, Mixed-flow, Non-clog
Multi-Stage
Submersible
Non-Clog
Vertical
Horizontal
Hydro Turbine
Propeller
Miscellaenous & Refurbishing and Retrofitting
Fire Fighting
Ash Slurry Pumps
End Suction Pumps
Well Point Dewatering          


End Suction

Construction Features:
  • Centerline (Self-venting) discharge
  • Back pull out design
  • Impellers offer optimum efficiency and low NPSH
  • Hydraulic Interchange-ability among all 500 and 5600 series pumps
  • Packing box

Options:

  1. Regular or Bronze fitted impeller.
  2. Semi open and enclosed impellers
  3. Grease or oil lubrication
  4. Frame mounted, biltogether

25mm to 250mm DISCHARGE SIZE

Flowmore  has an entire line of heavy-duty trouble-free End-suction type Centrifugal pumps which allows selection of  a suitable model for practically any demand. 

Highest precision standards and specialised up to date manufacturing methods, are combined to produce FLOWMOIRE pumps of quality and complete dependability. The exclusive and valuable features of these pumps, provide long and trouble-free service. They contain minimum number of parts thereby reducing maintenance problems. 

The shaft, impeller or gland - all FLOWMORE pump parts, have been engineered to give extra service and performance with greater reliability. 

CASING:  The one-piece volute is of close grained Cast-iron with integral suction and discharge openings.

IMPELLER: 
Enclosed type, Cast-iron construction to suit service requirements. Designed for 
high efficiency, with moderately steep characteristic.They are precision moulded
machined and balanced to eliminate any vibration that might cause wear.

SHAFT:  
Suitable special steel shaft is incorporated to transmit maximum power at low working stress, without vibration. They are machined to close tolerances.

BEARING:     
The shaft is supported on two extra size double ball bearings designed  for radial and thrust loads. Both bearings contain grease for long  life upto 40,000 operating hours.

Flowmore can offer various components in other available alloys as well based on customer's requirement  

 

 

Home | Manufacturing Facilities | FPL Info | FMI Info | R & D | Contact Us | Online Enquiry
Multi-Stage | Submersible | Non-Clog | Vertical | Horizontal | Hydro Turbine | Propeller | Retrofit
Fire Fighting | Ash-Slurry | End-Suction | Well-Point Dewatering | Bore Well Submersible
Vertical Sump Pumps | Turnkey Orders | Download

Best Viewable in 800X600 resolution and IE5+.