•  Indias Largest Test Bed. 
•  Vertical pump testing upto 70,000M3/Hr flow rate and motor rating upto 6000 KV in 11 KV, 6.6 KV or 3.3 KV
•  2nd test bed can test pumps with job motor up to 2000 KW motors of 11 KV, 6.6 KV and 3.3 KV.
•  Have soft starters for starting motors up to 5000 KW rating.
•  VFD for LT motors up to 450 HP rating.
•  Crane capacity up to 60 tons
•  Full bore electromagnetic flow meters.
•  Computerized test bed for directly acquiring reading
•  Head measurement up to 400 meters through pressure gauges.
•  Manometers used for measuring suction side pressure.
•  Non-contact techno meters for speed measurement.
•  Noise and vibration (Velocity / Displacement / Measurement).

•  IN HOUSE PATTERN MAKING
•  ALUMINIUM/METAL
•  WOOD
•  RESIN
•  PATTERN INVENTORY IS MAINTAINED SO THAT SPARES CAN BE MADE AVAILABLE EVEN FOR PUMPS SUPPLIED 50 YEARS AGO, FOR INTERCHANGEABILITY.
•  All patterns are made by CNC machines

•  IN HOUSE Captive foundry with installed capacity upto 1500 tons of grey iron and 100 tons of non-ferrous castings
•  GREY IRON AND ALLOYS CASTINGS UP TO SINGLE PIECE OF 7000 Kgs.
•  Ni RESIST / Ni HARD –ALLOY IRON UP TO SINGLE PIECE OF 2000 Kgs.
•  NON –FERROUS (BRONZE AND BRONZE ALLOYS) UP TP SINGLE PIECE OF 2000 Kgs.
•  Grit & Sand Blasting facility
•  In house chemical and metallurgical lab to cater to all inspections of a foundry FABRICATION

•  ASME CODE APPROVED WELDING
•  3 G QUALIFIED WELDERS approved by Lloyds
•  MAX SINGLE PIECE FABRICATION UP TO 30000 Kgs.
•  HEAT TREATMENT / STRESS RELIEVING BY INDUCTION HEATING

•  PHYSICAL AND CHEMICAL TEST OF MATERIALS
•  ULTRASONIC TEST OF SHAFTS
•  DYE-PENETRATION TEST OF CRITICAL CASTINGS, SHAFTS AND WELDS
•  RADIOGRAPHY OF WELDING AND CRITICAL CASTINGS
•  MAGNAFLUX TEST OF CASTINGS
•  DYNAMIC BALANCING OF IMPELLERS AND ROTATING COMPONENTS
•  HYDRO PRESSURE TESTING OF CASINGS, COLUMNS, SD HEAD ETC.

•  Ultrasonic Testing.
•  Dye penetration Testing.
•  Magnetic Particle Testing (Yoke Type).
•  Testing facilities for chemical Analysis & mechanical properties.
•  Various Measuring Instruments & Gauges.
•  Standards room for in-house calibration of measuring instruments & gauges.
•  Radiography Testing (arranged by outside agency).
•  SUMP Model Testing & CFD