Next

Construction Features:

1. Bowls of cast iron

2. Stainless steel bowl shaft

3. Surface discharge head with deep stuffing box designed for extra strength

4. Cast iron/ bronze/ stainless-steel impellers

Options:

1. Enclosed or semi-open impellers

2. Oil or water lubricated

3. Deep well, short set

4. Underground open/ enclosed elbow

5. Pull-out construction

6. Regular, Bronze or stainless steel fitted impeller

7. Special alloys construction

Flowmore manufacturers a broad line of Vertical Turbine pumps ranging from 100 to 1000 mm dia. for capacities upto 4,500 M3/Hr. with heads upto 300M. Flowmore Vertical Turbine Pumps are suitable for water supply, booster service, cooling towers, drainage, recirculation, air-conditioning, dewatering, processing pumping, boiler-feed, petro-chemical transfer etc.   In open-line shaft pumps, bearings are water-lubricated while in the enclosed line shafts oil-lubrication is provided. Column Assemblies, both flanged and threaded are available. Through modern design and controlled quality, bowl and impeller combination achieve efficiencies higher than generally available for horizontal pumps. By multi-staging, any desired pressure can be achieved with optimum performance.

Steep head capacity performance and non over loading of driver are characteristics of these pumps. Flowmore enjoys a unique position of being able to recommend the construction best fitted for any service requirement.